NETLEA L-Bracket Aquarium Light Hanging Fixture — Single Arm, Adjustable Aluminium (Black/Silver)

Description

NETLEA L-Bracket Aquarium Light Hanging Fixture (Single Arm) — Overview

The NETLEA L-Bracket is a single-arm mounting stand that holds an aquarium light above an open-top tank. Crafted from lightweight aluminium, it is strong, sleek and fully height-adjustable, and clamps neatly onto the tank rim — lifting the light off the water for a clean, floating look. It is designed to be compatible with virtually any aquarium light, making it an easy way to convert a hanging/pendant or bar light into a rim-mounted fixture. As NETLEA puts it, “a good NETLEA light should match its good bracket.”

Key Features

• Single-arm L-bracket — holds the light above the tank with a tidy, minimal profile.
• Aluminium construction — strong yet lightweight and portable, with exquisite workmanship; won’t rust in the aquarium environment.
• Fully adjustable — a slotted sliding arm and an adjustable hang kit let you freely set the light’s position, height and reach.
• Tank-rim clamp — fixes securely to the tank edge with knurled thumb-screws; no drilling and no ceiling fixings.
• Protective, anti-shake clamp — the clamp jaw is lined so it “doesn’t scratch the metal” and holds steady without wobble.
• Strong bearing capacity — engineered to carry pendant and bar lights securely.
• Two finishes — Silver (natural aluminium) or Matte Black.
• Universal compatibility — works with most aquarium lights, especially NETLEA AT-series and similar pendant/bar fixtures.

Adjustable Hang Kit

The bracket includes an adjustable steel-wire hang kit so you can suspend the light from the arm and freely fine-tune its position over the tank. The wire connector works in three simple moves: Push — insert the steel wire into the connector from the bottom; Pull — once the wire passes through the hole, pull it firmly to lock; Pull out — to release, press and hold the protrusion below the connector and unplug the cable.

Installation Steps

1. Assemble the screws on the arm.
2. Fit the self-locking screw.
3. Fit the flat screws.
4. Clamp the bracket onto the tank rim.
5. Hold the buckle to adjust the sling (hang-wire) to the height you want.
6. Fix the light’s wire to the bracket pole.

In the Box

Main arm, sliding/adjustable arm, rim-clamp block, white anti-scratch protective pads, steel-wire hang kit with quick connector, knurled thumb-screws, hex-socket screws, and two Allen keys. (Contents shown for both Silver and Matte Black versions.)

Specifications

Ideal Use Cases

Open-top planted tanks and aquascapes where you want to mount a pendant/bar light on the tank rim and adjust its height and position — especially with NETLEA AT-series and similar aquarium lights.

نظرة عامة (عربي)

حامل NETLEA على شكل حرف L بذراع مفرد يرفع إضاءة الحوض فوق الماء. مصنوع من ألمنيوم خفيف قوي وأنيق بتشطيب دقيق، وقابل لتعديل الارتفاع والموضع بالكامل عبر ذراع منزلق وطقم تعليق سلكي. يُثبّت بمشبك على حافة الحوض بمسامير لولبية مزركشة دون ثقب، ومبطّن لئلا يخدش المعدن ويمنع الاهتزاز. الذراع الرئيسي بطول 56 سم، الذراع المنزلق 28.5 سم، وكتلة المشبك 10×2.1×3.4 سم بفتحة فك 1.3 سم. متوفّر باللونين الفضي والأسود المطفي، ومتوافق مع معظم إضاءات الأحواض المعلّقة وخاصة سلسلة NETLEA AT. خطوات التركيب: تركيب المسامير، ثم المسمار ذاتي القفل، ثم المسامير المسطّحة، تثبيت المشبك على الحوض، ضبط سلك التعليق بالمشبك، وأخيراً تثبيت سلك الإضاءة على عمود الحامل.